Glued panel for a worktop
Here you could find selected panels that are best suitable for tabletops. These panels do not need additional gluings.
For countertops it is best to use a thickness> 25 mm. The type of wood, width and thickness depends on your preference.
If you need a kitchen countertop, visit the Kitchen Countertops website section.
NB! To make a tabletop from these panels, you need to:
Saw it to final dimensions (by default, all panels with a margin of + 1-5 mm on all sides).
Smooth corners and edges. Make a radius so that the table top will look neat and unsharp.
Grind. If you use soft types of wood (birch, beech), then you can use sandpaper. In the case of hardwoods (oak, ash), it is better to use special devices.
Finish with oil / varnish / stain, depending on your tastes.
If necessary, the last two procedures should be repeated several times.
If you do not want to get involved with this - just contact us. We will make you a finished tabletop. We can make it from the glued panel presented in this section, or from the wide boards.